Ship Rider - Engineer (OCONUS - US Navy 5th and 7th Fleet) in Mobile, AL at Austal Job at Austal, Mobile, AL

c0NKbm5LQU1VMUpWQVVVZlNQMUtKQlZZTlE9PQ==
  • Austal
  • Mobile, AL

Job Description

Representative (OSR)

SUPERVISES:  N/A

OVERALL PURPOSE OF JOB: Ship Rider Engineer will embark on vessel from departure from homeport until the return to homeport, being rotated out every 2 to 3 months.  This person shall accomplish the job requirements listed below on LCS 2 Independence variant,  supporting ship operations and repairs during assigned deployments and in port periods.

SUMMARY:  To perform this job successfully, the individual must be able to perform each essential duty frequently, independently, and satisfactorily.  The qualifications listed below are representative of the minimum knowledge, skill, and/or ability required.

AUTHORITIES / RESPONSIBILITIES:

  • Diagnose cause of system failures and report findings to the maintenance team.
  • Work directly with the shipboard crews in resolving technical and operational issues and maintain positive customer relations in all communications. 
  • Assist in management of Austal/subcontracted personnel in offsite locations.
  • Assist Ship’s Force in initial troubleshooting in the event of a HM&E system or equipment problem so that required resources can be identified and planned.
  • Make recommended adjustments equipment settings and controls according to specifications, and in a timely fashion to prevent or mitigate fire hazards, fire, flood, theft, sabotage or other irregularities affecting physical security of the ship
  • Responsible for troubleshooting complex operational issues of ships systems.
  • Potential offsite travel is estimated at 50-75%. Overseas travel is a significant amount of the travel, although NO TRAVEL to declared warzones is anticipated
  • 75% of travel time will be underway with the ship to perform diagnostic and preventive maintenance services. 
  • Assists in directing the efforts of subcontractor and company personnel in the handling and installation and utilization of various systems and equipment as needed.
  • Maintain liaison communications with the ashore Maintenance Team, specifically the assigned Government PM/COR, and the LCS crew on equipment material status.
  • Provide data on equipment casualties that occur while underway or outside of homeport / Forward Operating Site (FOS) and provide repair recommendations to the government
  • Provide daily reporting data to the assigned Government PM/COR and HM&E OSR and all others as directed by the Government PM/COR.
  • Inspect and provide technical guidance and assistance during process performance, equipment re-assembly procedures and adjustment, and when specified. Comply with manufacturer’s and Navy Technical Manual requirements.
  • Assess equipment anomalies and casualties and provide repair recommendations to the crew and maintenance team.
  • Submit and maintain records of all the repairs accomplished and the Technical Representative’s assessment of the equipment condition
  • Maintain direct communications with the PMO and assigned Government PM/COR on all matters concerning the operation and maintenance of the ship's systems and equipment.
  • Assist with routine maintenance and any repairs outside the capacity of the crew.
  • Review and make recommendations for updates to the CSMP
  • Assists in conducting integrated equipment systems tests. 
  • Routinely provides technical assistance to ship’s crew.
  • Diagnose and take immediate interim steps to mitigate hazardous conditions in accordance with established procedures and guidelines.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • Shall be a Licensed Marine Engineer and have, at a minimum, five years of marine industry repair experience, preferably managing US Navy vessel repairs.
    • Equivalent experience is a minimum of 15 years of maintenance management experience either with the US Navy, Military Sealift Command (MSC) or the US Merchant Marine.    
  • Have a minimum of five (5) years of leadership experience on complex repairs in a marine environment and have experience conducting inspections, surveys and repairs onboard US Navy vessels
  • Thorough understanding and ability to direct all types of inspections, repairs and testing of marine equipment with a demonstrated knowledge of ship operations, reliability engineering, maintenance concepts, programs and procedures.
  • Knowledge of support systems, plumbing, refrigeration, heating, and air conditioning.
  • Comprehensive knowledge of shipyard practices and operational principles of the shipbuilding process with a sound knowledge of all shipyard disciplines and support services or equivalent USN operations and leadership experience.
  • Familiar with the development of work items, drawings, analysis, cost estimate and technical reports for various ship repair projects.
  • Coordination of technical personnel and management of subcontractors from numerous labor trades including Original Equipment Manufacturers (OEMs), riggers, crane operators, transportation and industrial marine trades.
  • Ability to effectively communicate the status of operations on a daily basis via written or voice communications, generate detailed reports in a clear, concise and timely manner, and provide detailed summary reports at the completion of operations.
  • Demonstrated ability to read and comprehend ship construction drawings, schematics, technical manuals and equipment operational manuals with ability to apply the information to live system repair, maintenance and operation. Must have fundamental technical understanding of ships propulsion systems, electrical power generation and auxiliaries related to marine vessels.
  • Demonstrated knowledge and practical experience with HM&E systems and understands the relationship of systems within the design.
  • Knowledge of Navy organizational set up and the ability to interact with personnel and officers at all levels.
  • Proficient with personal computers and experienced in Microsoft Office software including Project.
  • Be 301 Craftsman qualified in accordance with NAVEDTRA 43241-Series J, PERSONNEL QUALIFICATION STANDARD FOR 3M or equivalent.

PREFERRED QUALIFICATIONS:

  • Bachelor’s Degree in an Engineering discipline
  • Management or supervisory roles such as Supervisor of Shipbuilding, Conversion and Repair command, Regional Maintenance Center, Navy Central Planning Activity, or Planning for Engineering and Repair Activity.
  • Experience as a Naval Supervising Authority Project Manager or a US Navy Port Engineer.
  • Home Port repair/modification experience.
  • Experience with LCS Independence class ships.

TOOLS: various

LIAISES WITH: 

  • Austal Program Management
  • Engineering
  • Post Delivery Project Team
  • Supply Chain Management
  • Navy Port Engineers
  • Navy (Navy Chief Engineers & Navy Commanding Officers) & Government Customer

PHYSICAL REQUIREMENTS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.

While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear.   

Specific physical requirements include the following:

  • Must have the ability to bend, squat, stoop, crawl, and kneel.
  • Perform prolonged standing.
  • Ability to turn head from side to side and about the vertical axis.
  • Ability to turn body at the waist from side to side and about the vertical axis.
  • Lift/push/pull 50lbs to 75lbs on an occasional basis.
  • Lift/push/pull up to 20lbs on a frequent basis.
  • Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
  • Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts.
  • Able to work at a variety of levels (ex. waist, eye, overhead).
  • Demonstrate the ability to safely and appropriately use required tools and equipment.
  • Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
  • Possess sufficient handgrip and coordination to carry and operate tools and equipment.
  • Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
  • Ability to withstand cold and hot temperatures.
  • Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time.
  • Able to respond to verbal and audible sounds/commands.
  • Able to utilize adequate visual skills.
  • Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
  • Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.  The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold.  The noise level in the work environment is usually very loud.

ADDITIONAL GUIDELINES:

  • Must be able to obtain and maintain Secret Security Clearance, Navy base and shipyard accesses.
  • Must be able to obtain a US Passport
  • Able to provide proof of US Citizenship to obtain US Security Clearance or CAC Card
  • Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:
  • 18 years of age or older at time of application
  • Able to provide proof of US Person Status
  • No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
  • No felony convictions of Drug crimes within three years from disposition date
  • Willing to submit to a drug screen
  • Willing to submit to a background check

Equal Employment Commitment

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.
Austal shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability.  Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion. 

Job Tags

Full time, For contractors, For subcontractor, Interim role, Immediate start, Overseas, Gangs,

Similar Jobs

Royal Caribbean Group

Sr. Video Editor Job at Royal Caribbean Group

Position Summary As a Sr. Video Editor for Royal Caribbean Group (the parent company of Royal Caribbean International, Celebrity Cruises and Silversea), you will work in a fast-paced content production environment within the. As a member of the Creative Hub, you will...

Tracen Technologies, Inc

Military Analyst Job at Tracen Technologies, Inc

 ...programs.Desired Skills:Experience working with Department of the Army and Department of Defense customersRetired Army, Air Force, Navy, or Marine Corps Officer or Senior NCO with experience in developing, drafting, staffing, and reviewing service policies and other... 

Biltmore Properties Inc

Assistant Property Manager Job at Biltmore Properties Inc

 ...essential to prioritize tasks and meet deadlines in a dynamic work environment. Proficiency in property management software such as Yardi or AppFolio is preferred to help streamline processes and track property performance. Familiarity with Microsoft Office suite, particularly... 

Northwest Texas Healthcare System

Sr. Surgical Tech / Surgical Tech / (0700-1530) Job at Northwest Texas Healthcare System

 ...POSITION SUMMARY: A person prepared in various, complex, technical surgical skills who actively participates in the care of the surgical...  ...scrub simple uncomplicated surgical cases applicable to the Sr. Tech level. Demonstrates both knowledge and technical expertise regarding... 

American Driver

Immediate Openings For CDL A Intermodal Drivers Top Pay Home Daily Job at American Driver

 ...CDL A Intermodal Driver Home Daily & Earn $1400$1800 Weekly! Are you an experienced CDL A driver seeking a le job with excellent pay and consistent home time Join our Intermodal team in Sumner WA where youll enjoy being home daily while earning between $1400 and...